If you find this post useful, please consider donating in the form of a Â
If you use OS X or Linux on your desktop/servers, you may be at a point where you have configured a lot of your own settings, configurations, or themes within dotfiles. For the uninformed, dotfiles are files in your home directory that begin with a dot, or full-stop character. This indicates to the operating system that they are hidden files, used to set configuration settings for tools like
vim, or shells such as
zsh to name a few.
This tutorial does not go into the specifics of configuring your dotfiles. Instead, my goal is to provide you with a light introduction to Git version control, allowing you to maintain your dotfiles in a centralized repository on github.com
What’s The Point?
If you aren’t convinced it’s worth your time to put your dotfiles into Git version control, consider this:
By storing your dotfiles in a Git repository, you’ll be able to use them on any OS X or Linux machine with Internet access.
This means that in addition to gaining the ability to revert back to a known-working setup should you misconfigure your files, you will also be able to work in an environment you’ve customized yourself. Â On almost any workstation or server, you’re a simple
git clone away from the familiarity of your customizations. Â More on
git clone later… Â For now, we’ll begin with an example.
A Basic .vimrc
The following is an example of the type of file we would manage with
git. This is actually an abridged version of my own
.vimrc. The full version is available for view on my public Github:
set nocompatible " get rid of Vi compatibility mode. SET FIRST! filetype plugin indent on " filetype detection[ON] plugin[ON] indent[ON] set t_Co=256 " enable 256-color mode. syntax enable " enable syntax highlighting (previously syntax on). colorscheme desert " set colorscheme set number " show line numbers set laststatus=2 " last window always has a statusline filetype indent on " activates indenting for files set nohlsearch " Don't continue to highlight searched phrases. set incsearch " But do highlight as you type your search. set ignorecase " Make searches case-insensitive. set ruler " Always show info along bottom. set autoindent " auto-indent set tabstop=4 " tab spacing set softtabstop=4 " unify set shiftwidth=4 " indent/outdent by 4 columns set shiftround " always indent/outdent to the nearest tabstop set expandtab " use spaces instead of tabs set smarttab " use tabs at the start of a line, spaces elsewhere set nowrap " don't wrap text
If you don’t have your own
.vimrc in your home directory, you’re welcome to use mine. It is intentionally minimal, as it works standalone (you don’t need to do anything other than drop it into your home directory for it to work). That said, we’re going to do things a little differently from here on, so pay attention (if you aren’t already).
Organization, Organization, Organization
The typical location for dotfiles on an OS X or Linux machine would be in a users home directory, e.g.
/home/smalleycreative/.vimrc. We aren’t typical though, are we? We are trying to be crafty.
For starters, we’ll be putting all of our dotfiles into a folder called
dotfiles, like so:
/home/smalleycreative/dotfiles/vimrc. Then, we’ll simply symlink to them from our home directory. To programs like
bash these symlinks are transparent. As far as these programs are concerned, our dotfiles will still appear to exist at the top-level of our home directory, even though they’ll be tucked away in the
If you’re on your OS X or Linux workstation now, you can get started by creating the
dotfiles directory in your home directory by running the following command:
~/dotfiles (and/or any other dotfiles you want to manage with Git). For simplicity, I drop the dot from the filename (
vimrc). I only prepend the dot when I create my symlink to
vimrc in my home directory. What is important to keep in mind is we still haven’t used Git at all yet. We’re just preparing by organizing our dotfiles into one folder. For example, to copy an existing
.vimrc, run the following command:
mv ~/.vimrc ~/dotfiles/vimrc
Once we have a bunch of dotfiles in this directory, a directory listing will likely look a lot like this:
ls ~/dotfiles vimrc zshrc bashrc
The Install Script
Since we want portability (the ability to use our files on any machine with Internet access), we’re going to need an install script. This script goes in our
~/dotfiles directory. Here’s mine (The full version is available for view on my public Github):
#!/bin/bash ############################ # .make.sh # This script creates symlinks from the home directory to any desired dotfiles in ~/dotfiles ############################ ########## Variables dir=~/dotfiles # dotfiles directory olddir=~/dotfiles_old # old dotfiles backup directory files="bashrc vimrc vim zshrc oh-my-zsh" # list of files/folders to symlink in homedir ########## # create dotfiles_old in homedir echo "Creating $olddir for backup of any existing dotfiles in ~" mkdir -p $olddir echo "...done" # change to the dotfiles directory echo "Changing to the $dir directory" cd $dir echo "...done" # move any existing dotfiles in homedir to dotfiles_old directory, then create symlinks for file in $files; do echo "Moving any existing dotfiles from ~ to $olddir" mv ~/.$file ~/dotfiles_old/ echo "Creating symlink to $file in home directory." ln -s $dir/$file ~/.$file done
The commented sections in the above script explain it. First, the script cleans up any old symlinks that may exist in our home directory and puts them into a folder called
dotfiles_old. It then iterates through any files in our
~/dotfiles directory and it creates symlinks from our home directory to these files. It handles naming these symlinks and prepending a dot to their filename.
If we’ve got this script in our dotfiles directory, and we’ve got our dotfiles in there too, we’re ready to start using Git to manage these files.
Gitting Started with GitHub (Git it?)
Before continuing, we’re going to want to create a GitHub account. GitHub allows us to set up a free public Git repository, accessible from any machine with Internet access. They also have a very well-written help section. You would be well advised to read through and follow the instructions pertaining to your particular operating system:
Seriously — Read or at least skim over this documentation. Once you’ve set up your account, and you’re comfortable with the basics, come back here, and we’ll continue with the steps required to get your dotfiles stored in your public Git repository at GitHub.com.
Creating Our Local Git Repo
On our workstation we are going to initialize a new Git repo. To make our
~/dotfiles directory a Git repo, we simply change to it, and run the
git init command:
cd ~/dotfiles git init
We then start to track any files that we want to be a part of our repo by using the
git add command on them:
git add makesymlinks.sh git add vimrc
Finally, once we’re happy with the state of our files, we can commit them.
Think of a commit as a snapshot of your project â€”code, files, everything â€” at a particular point in time. More accurately, after your first commit, each subsequent commit is only a snapshot of your changes. For code files, this means it only takes a snapshot of the lines of code that have changed. For everything else like music or image files, it saves a new copy of the file.
git commit -m 'My first Git commit of my dotfiles'
What’s important to realize is that this commit is local — We still haven’t uploaded anything to GitHub. In fact, we cannot do this until we tell our local repository where our public GitHub repository actually resides. To do this, we use
git remote add origin, like so:
git remote add origin email@example.com:mygithubusername/dotfiles.git
Finally, we can push our changes to GitHub:
git push origin master
Tracking Updates to Our Git Repo
If we decide to update our
vimrc, we’re going to want to make sure these changes get tracked on GitHub.com, so what is the process? First, add the file:
git add vimrc
Then, commit locally, and write a commit message:
git commit -m 'Changed vim colorscheme!'
Then, push to GitHub:
git push origin master
Cloning Our Dotfiles to Another Machine
Ultimately, we’re going to come to a point where we want to use our customized dotfiles on another server or workstation. That is, after all, one of the primary benefits of using Git to manage our dotfiles. To do this, it’s as simple as running the following command from our home directory:
git clone git://github.com/<mygithubusername>/dotfiles.git
Once the repository has been cloned to our home directory, simply change to the
dotfiles directory, make the
makesymlinks.sh script executable, and run the script, like so:
cd ~/dotfiles chmod +x makesymlinks.sh ./makesymlinks.sh
Warning: If you’re running Debian Linux, this will most likely install
zsh on yourÂ system if it isn’t already installed. This is a feature I added to my script to automate things as much as possible. If for some reason you don’t want
zsh to be installed on your computer (e.g. you’re on somebody else’s server), remove the
install_zsh line from
makesymlinks.sh. This will cause it to set up all of your dotfiles without attempting to install
That’s it! If the settings don’t take effect right away, we can just log out and log back in (this will re-source our dotfiles).
Updating a Local Git Repo
The best way to explain this is with a scenario. Say we’ve created a repository on our workstation (Machine A) and we’ve pushed our changes to GitHub, then we’ve cloned these changes down to our server (Machine B). We then go back onto our workstation (Machine A), make more changes, and push them to GitHub. How do we get these changes onto our server (Machine B)? To do this, we use the
git pull command:
git pull origin master
After running this command, Machine B will be current with any changes that were pushed to GitHub from Machine A. It quite literally pulls any updates to the repo from GitHub.
Whether you’re trying to wrangle a large collection of custom dotfiles or you’re just getting started and you weren’t sure where to begin, I hope this was an informative introduction to managing your configuration settings via the power of Git.